• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 38 subscribers
  • Views 394 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: Can't perform noise analysis

Valeryi Parkouski
Prodigy 40 points

Part Number: PSPICE-FOR-TI

Tool/software:

Hello!

For some reasons I can't perform noise analysis. All time I see error: ERROR(ORPSIM-16291): Must be independent source (I or V)

I don't understand, what could be wrong?

Does anyone can explain the problem?

Below are my schematic and setup settings.