• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 380 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: ERROR(ORCOMMN-12005): Unable to launch OrCAD PSpice TI.

nico Wang
Prodigy 10 points
Part Number: PSPICE-FOR-TI

Tool/software:

在安装PSPICE-FOR-TI后，打开软件显示：ERROR(ORCOMMN-12005): Unable to launch OrCAD PSpice TI. A valid license was not found at the 5280@localhost license server. Update the license server configuration to indude OrCAD PSpice TI licenses.
已经以管理员模式打开安装，环境变量也有。
还望帮忙解答，谢谢！
  • 0
    TI__Mastermind 37640 points

    Please reboot your PC and try again and create a debug file and share it with us if you still have trouble:

    • Create a new environment variable "CDS_LIC_QA_TEST". Set it to something like C:\Cadence\PSpiceTI\LicLog.txt where you have write permission to.
    • Run PSpice for TI if installed or the installer if not, wait for the error message to be shown, then check if the file C:\Cadence\PSpiceTI\LicLog.txt is created.
    • share the file LicLog.txt
    • Delete the environment variable "CDS_LIC_QA_TEST". (otherwise LicLog.txt will keep growing).

    thanks,

    JC

  • 0 in reply to JC Zhu
    Prodigy 10 points

    Hi, JC Zhu

    Thank you for your support. I opened the software this morning and found it was running normally, but I didn't do anything else. 

    nico