• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 315 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: License issue when opening PSpice for first time after install

Patrick Hingston
Prodigy 20 points
Part Number: PSPICE-FOR-TI


Tool/software:

After initial install, I get "ERROR: Unable to launch OrCAD PSpice TI. A valid license was not found at the <none> license server. Update the license server configuration to include OrCAD PSpice TI license. 

How do i update the license?  where should i be pointing to?

  • 0
    TI__Mastermind 37790 points

    Please reboot your PC and try again and create a debug file and share it with us if you still have trouble:

    • Create a new environment variable "CDS_LIC_QA_TEST". Set it to something like C:\Cadence\PSpiceTI\LicLog.txt where you have write permission to.
    • Run PSpice for TI if installed or the installer if not, wait for the error message to be shown, then check if the file C:\Cadence\PSpiceTI\LicLog.txt is created.
    • share the file LicLog.txt
    • Delete the environment variable "CDS_LIC_QA_TEST". (otherwise LicLog.txt will keep growing).

    thanks,

    JC