PMP40988: pmp40988

Michael Creighton

Part Number: PMP40988

Tool/software:

We are starting a new design that requires a 5kw PFC front end. This part appears to fit the design criteria. Is there a contact at TI we can ask questions concerning the maturity of this reference design?

Thanks

Michael Creighton

Ametek Powervar

22 days ago

0 Brent McDonald 17 days ago

TI__Intellectual 1765 points

What is your question?

0 Michael Creighton 15 days ago in reply to Brent McDonald

Prodigy 10 points

Brent,

Thanks for replying. We cannot find the several parts listed on the BOM for the reference design. Is this design mature? Have you had similar inquiries?
Thanks

Michael Creighton

0 Brent McDonald 15 days ago in reply to Michael Creighton

TI__Intellectual 1765 points

Hi, MIchael,

The design functions as described in the test report. We are building the design now per the BOM. We have had no issue procuring the parts. There are some custom magnetics on the board. To procure those you will need to contact the magnetics vendors directly.

Best regards,

Brent

0 Michael Creighton 10 days ago in reply to Brent McDonald

Prodigy 10 points

Thanks Brent

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP40988: pmp40988