Tool/software:
Dear TI Team,
I am reviewing the PMP11064 evaluation board design and would like to clarify a few design considerations:
Flyback (UCC28910D):
- What ripple current value was assumed during the primary inductance calculation?
- My computed value for the primary inductance does not align with the design, hence I would like to understand the design basis.
LLC (UCC25600D):
- What upper and lower resonant frequencies were selected for this design?
- Could you elaborate on the design methodology or criteria used to determine these values?
PFC Stage:
- What ripple current assumption was used in the inductor design?
Your inputs will help me reconcile my calculations with the reference design.
Best regards,
Anand