Copy command TINA-TI

Urs Hammer

Other Parts Discussed in Thread: TINA-TI

Dear all

I have installed the latest version 9.3.30.248 SF-TI of TINA-TI but it seems that the Ctrl+C or Edit->Copy commands do not work. The following error occurs: "Access violation at address 0091F684 in module 'tina.exe'. Read of address 00000000."

Can you confirm this problem and do you provide any fix to it?

Best regards and thanks for your valuable support

Urs

over 14 years ago

0 John Miller - Sensing over 14 years ago

TI__Mastermind 40295 points

Urs,

We are aware of this issue and will soon have a new version of TINA9-TI available at http://www.ti.com/tool/tina-ti.

Regards,

John

0 Urs Hammer over 14 years ago in reply to John Miller - Sensing

Prodigy 30 points

Hi John

That's good news! I am looking forward to the update.

Regards,

Urs

0 John Miller - Sensing over 14 years ago in reply to Urs Hammer

TI__Mastermind 40295 points

Urs,

Just a quick follow up on our eralier exchange.

The latest version of TINA has been posted on the web and is available for download.

Regards,

John

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Copy command TINA-TI