PSPICE-FOR-TI: tps543620 generate bode waveform fail

Tony,

You have not shared any information. What are you trying to accomplish? Are you getting a PSpice error, or is the bode plot not what you are expecting? Please specify.

Carson

Hi, Carson

The attachment is my project, and the settings and results are shown in the picture,
At present, I need to export the Bode curve, but I am not sure if the AC source added in the schematic is correct. Additionally, how can I capture the phase/main margin of the curve in the results?

tony,

Thanks for your patience, I will have time to work on this next week.

Carson

ok, but my PSPICE FOR TI license service for only 8 days, How can I apply to extend this license for 1 year or indefinitely?

Tony,

I realized your problem, as I am getting the same result when I run your schematic in PSpice for TI. You cannot get bode data from a PSpice transient model, you need a PSpice average model to get a bode plot. 

You can get both bode and transient in the same model through our Simplis model, which is available online on the product folder. It also runs much faster than PSpice.

Thanks,

Carson

Got it, I'll try again, but the license service already overdue, how to solve it?  thanks a lot.