Spice model for TPS55010

Andrea Rigo

Prodigy 30 points

Other Parts Discussed in Thread: TPS55010, TINA-TI

I know there is a TPS55010 Spice model but it's encrypted and made with OrCad.

Is there anyone who developed a similar model not encrypted and usable by other simulation environment?

Thanks

over 14 years ago

0 Nikhil Gupta (Product Folder Models) over 14 years ago

TI__Mastermind 39210 points

Hi Andrea,

Have you used TINA-TI before. It is a free SPICE simulator that we provide. If you would like, I can get you a TINA-TI model for this part. Let me know if that is something you would be interested in?

Best regards,

Nikhil

0 Andrea Rigo over 14 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 30 points

Ok TINA-TI will be fine.

I've also used LTspice to simulate power circuits so if the model is compatible it will be better

Regards

0 Nikhil Gupta (Product Folder Models) over 14 years ago in reply to Andrea Rigo

TI__Mastermind 39210 points

Hi Andrea,

The TINA-TI model that we will release will be encypted and will only work in TINA-TI.

Best regards,

Nikhil

0 Andrea Rigo over 14 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 30 points

Hi Nikhil,

thanks for the TINA-TI. Where I'll find it?

0 Nikhil Gupta (Product Folder Models) over 14 years ago in reply to Andrea Rigo

TI__Mastermind 39210 points

Hi Andrea,

When the model is ready it will be uploaded to the product folder under "Tools and Software".

Best regards,

Nikhil

0 Nikhil Gupta (Product Folder Models) over 14 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Mastermind 39210 points

Hi Andrea,

The TINA-TI model for TPS55010 is attached. It will also be released to the product folder in a few days. Let me know if you have any questions.

Best regards,

Nikhil

8546.TPS55010_TRANS.TSC

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Spice model for TPS55010