Tina-TI model for CSD17308Q3

Ming Liu

Other Parts Discussed in Thread: CSD17308Q3, TINA-TI

Hello!

I have downloaded the PSpice model for CSD17308Q3 from TI's homepage.

But it looks like PSpice model cannot be used in Tina-TI.

I have known the reason for this problem from this forum.(The PSpice models for the NexFETs are encrypted and can only be used in PSpice version 15.7 or higher.)

Could you convert this model into TINA-TI's model for me?

Thank you very much.

over 13 years ago

0 Nikhil Gupta (Product Folder Models) over 13 years ago

TI__Mastermind 39210 points

Hi Ming,

Thanks for your interest in this TINA-TI model. I will add this into the translation queue and get back to you as soon as it is ready.

Best regards,

0 Britt Brooks - Online Design Tools over 13 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Mastermind 41310 points

Ming,

Please see the attached macro. To use it, simply use the Insert--> Macro... feature in TINA-TI and navigate to the location where you saved the macro (.TSM file).

7206.CSD17308Q3.TSM

Britt

0 Ming Liu over 13 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 55 points

Thank you very much!

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Tina-TI model for CSD17308Q3