• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 7968 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Using IBIS models with TINA-TI

Peter Perez
Prodigy 30 points

Other Parts Discussed in Thread: TINA-TI

Can I use IBIS models with the TINA-TI circuit simulation tool? If so, how are they imported? If not, which circuit simulation tool can I use.

  • 0
    TI__Mastermind 20460 points

    Hi Peter,

    Sorry for the delay in responding to your question.

    IBIS models cannot be imported into TINA-TI.

    Your options are to either run your simulation in a signal integrity simulation tool such as HyperLynx, or to import the IBIS model into HSpice.

    Regards,

    David Larkin

    Webench Design Center