• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 324 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Tina tool can exports the text file with 0kB

Bishnu Ban
Intellectual 500 points
Other Parts Discussed in Thread: TINA-TI

Hi.

I am using Tina (free trial version 9.0) since 10 days. I could simulate the circuit, the diagram could be exported text file e.g I could import it to e.g. excel  further processing e.g. calculation of effective value or Fourier transformation.

Since yesterday, the size of exported file is  0kB

-the file with same name was not open

-I have restarted computer

-I have restarted tina

-I have erased the all the files with same name.

But I could not export the simulated results to text file

once I marked the curves (many) and exported it, but only last curve was exported (all the curves).

Possible reasons

-perhaps works the export my trial version only for 10 days ?

-or any reasons ...

regards

Bishnu

  • 0
    TI__Mastermind 41310 points

    Bishnu,

    Can you provide the .TSC file you are using? I have seen no problems with the TINA-TI export function.

    Please note that TINA-TI does not have a trial version. If you are using TINA-TI, you should be able to use it without any time limitations.

    If you are using a free version of TINA Industrial from DesignSoft, there may be some time constraints and limitations on the demo verison. Please contact DesignSoft directly if that is the case.

    Britt