LP2953 pspice model

floren.g

Other Parts Discussed in Thread: LP2953, LP2951-N, LP2951

I'm looking for a pspice model of voltage regulator LP2953. I suppose it's difficult to find, so... Anyone can provide me with a reliable home made model or any advice to create a simplified one?

over 13 years ago

0 Britt Brooks - Online Design Tools over 13 years ago

TI__Mastermind 41310 points

Florencio,

If you are using PSpice verison 15.7 or higher, you could use the LP2951 PSpice model that is in the product folder. The devices are very similar except for output current limit and a different shutdown function (the LP2952/53 is a quicker shutdown).

Please note that the model is in the LP2951-N product folder.

Britt

0 floren.g over 13 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 20 points

Thank you very much, you have moved me to check the Pspice versions. At the office I have the 16 one and I have not asked the team to update it yet, it includes the LP2951 (I think in OPAMP folder); nevertheless, at home I have the 16.5 one (which I use with less frequency), and here there is a folder of regulators, even with the LP2953. So no problem...

Thanks.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

LP2953 pspice model