TINA Models for LM2623, TL4242 & MSP430G2102

Utpal

Prodigy 30 points

Other Parts Discussed in Thread: TL4242, MSP430G2102, LM2623, LMR61428

Hello,

Currently I need to use LM2623, TL4242 and MSP430G2102.

How and where would get the models?

if not available, can one create the required models?

Best regards,

--Utpal

over 12 years ago

0 Nikhil Gupta (Product Folder Models) over 12 years ago

TI__Mastermind 39210 points

Hi Utpal,

If models are available for a particular product, they can be found in their respective product folders on www.ti.com (Look under "Tools and Software").

1. The TL4242 models can be found here: http://www.ti.com/product/TL4242#simulationmodels

2. LM2623 is currently not supported with a SPICE model and it is not in the queue either. Would you consider using LMR61428 instead? It is very close to LM2623 in specifications and you can find the SPICE model here: http://www.ti.com/product/lmr61428#simulationmodels

3. MSP430 is not supported with SPICE models. To get support for this product, please post your question in the following forum: http://e2e.ti.com/support/microcontrollers/msp430/f/default.aspx?DCMP=msp430&HQS=msp430-forum

On a side note, many of these products are also supported with WEBENCH Designer (http://www.ti.com/ww/en/analog/webench/index.shtml?DCMP=sva_webench&HQS=webench) which can help you design, optimize, simulate and test your power supply system. You could use this to help you with your designs as well.

Best regards,

0 Utpal over 12 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 30 points

Many thanks Nikhil.

LMR61428 does appear to be an alternative.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA Models for LM2623, TL4242 & MSP430G2102