Customer would like Berkley Spice Model for THS4521

TimothyDarling

Hello Tina Folks,

Is it possible to get the Berkley Spice Model so the customer can run the simulation on Multisim? He prefers to work with that tool and indicated that the models we release for the part won't run on Mulitsim?

Let me know Thanks

Timothy Darling

over 16 years ago

0 JC Zhu over 16 years ago

TI__Mastermind 37520 points

Tim,

This device was modeled in Pspice and TINA.

Does the customer need help "importing" it into MultiSim? Or has he tried to run it in MultiSim and failed? If latter, do you know what kind of error he got?

THanks,
JC

0 JC Zhu over 16 years ago in reply to JC Zhu

TI__Mastermind 37520 points

Tim,

I just simulated the model in MultiSim and it looks OK. However, I don't know if there's a way to share the MultiSim component I created on my computer. If the customer knows how then we can do that.

Otherwise he can create his own following these steps:
http://zone.ni.com/devzone/cda/tut/p/id/3173

Regards,
JC

0 TimothyDarling over 16 years ago in reply to JC Zhu

TI__Intellectual 2310 points

Hi JC

With Mulitsim what type of spice model do you need for the amplifier? If we can help the customer getting that into Multisim that would be very helpful.

The customer does not think it is PSPICE.

Thanks

Timothy

0 JC Zhu over 16 years ago in reply to TimothyDarling

TI__Mastermind 37520 points

Tim,

The PSPICE model downloaded from the product folder is a text file.

He needs to follow the steps as described in the URL above, and copy-n-paste the PSPICE model into the multisim component wizard during step 6.

Regards,
JC

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Customer would like Berkley Spice Model for THS4521