• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 456 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ECO-mode Support?

Allen Wachter
Expert 6730 points

Does SwitcherPro support and model the Eco-mode operation of some of the SWIFT devices?  Will the loop response displayed for light loads be correct or will it be different if operating in Eco-mode?

Thanks!

  • 0
    TI__Intellectual 1280 points

    Hello Allen,

    We don't currently model Eco-mode in any of our applications.  As far as we know there has been no effort to model this by the designers or systems folks.   We put a note on the efficiency view (for devices in switcherPro that support Eco-mode) that basically says, there is no support for Eco-mode in the tool. So the user should know that the efficiency curve at light loads will not be predicting actual efficiency (for those devices).

    If you know someone who is working on a model for Eco-mode please let us know we'd like to see if it could be included in our tools.

    Thanks