• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 415 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SwitcherPro library part additions

Steve Widener
Genius 11010 points

I have about 4400 inductors I would like to add to "My Parts" but obviously, I don't want to type them in one at a time.

Is there a way to cut & past the information from an Excel list of parts into "My Parts" database without having to retype everything?

  • 0
    TI__Intellectual 2710 points

    Hello Steve,

    Currently, the only way users can add their own parts is adding them one at a time. We are working on the next phase of UDP (user-defined parts) feature where users can upload spreadsheet in a standard format and add their parts that way. If you can send me your excel spreadsheet in our standard format, then I will get them added to our SystemsParts library. But, then it will be available to all SwitcherPro users. I will send you an email with our template and the instructions.

    Thanks,

    Hetal Joshi

    Senior Developer and Project Manager

    Analog eLab Design Center

    HPA Design Tools

    Texas Instruments, Inc.

     

    TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.