Hey,
wish you all a very good day. i am naresh and a new and fresh engg. i am trying to make an 3kw solar inverter using c2000. can any one please help me in this.
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hey,
wish you all a very good day. i am naresh and a new and fresh engg. i am trying to make an 3kw solar inverter using c2000. can any one please help me in this.
Thanks
Hi Naresh,
We can certainly help. Please post your questions in the
TMS320C2000 Microcontrollers forum.
http://e2e.ti.com/forums/35.aspx
Murugavel
Hello Naresh,
Here is a first place to look.
http://focus.ti.com/docs/solution/folders/print/349.html
There are quite a few design considerations when designing a 3KW inverter. This type of project is not typically given to a new engineer. For example, if this is a grid tie inverter you will have to make sure you comply with UL1741 for the US case. Other regions will have their own requirements.
Thanks,
Dave F.
Hi Dave,
Thanks for the reply. as you said this 3KW project is not given to a new engineer, but i am doing this as of my own interest. i am new to inverter field. but lot of interest. i will go through the details you mentioned. please tell me if any other note i have to go through to get more details.
Regards
Naresh
Hello Naresh,
Here is a good general paper on inverters. It does not give much detail on the digital control but covers the design and test considerations.
http://www.nrel.gov/docs/fy09osti/44313.pdf
Let me know if this helps.
Dave F,