• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 243 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Switching frequency TPS54160

David Strasser
Intellectual 2530 points
Other Parts Discussed in Thread: TPS54160

How do I change the swtiching frequency on a TPS54160 design?  I am getting a message that the minimum on time is too small.  The schematic does not allow me to change the timing resistor value.

  • 0
    TI__Intellectual 2710 points

    When creating a new design, select 'Advanced inputs' option. There is a field for entering 'Switching Frequency'. Enter your value in that field and click on 'Find Devices'. Select TPS54160 from the list. While creating a design, SwitcherPro will use the switching frequency that you entered.

    Thanks,

    Hetal Joshi

    Senior Developer and Project Manager

    Analog eLab Design Center

    HPA Design Tools

    Texas Instruments, Inc.

     

    TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.