• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 417 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Webench , Using power block for TPS43061

Ryuji
Guru 20090 points

Other Parts Discussed in Thread: TPS43061, CSD86330Q3D, TINA-TI

Hello,
 
CSD86330Q3D is used for TPS43061 switch, in the datasheet page17 , figure 21.
But I can't simulate TPS43061 with CSD86330Q3D by Webench.
 
Could you please kindly let me know how to simulate with CSD86330Q3D by Webench?
 
Best Regards,
Ryuji Asaka
  • 0
    TI__Genius 14455 points

    Hi Ryuji,

         The CSD86330Q3D Power Block is currently not available in WEBENCH. The TPS43061 in WEBENCH is currently not enabled for simulation. For you to simulate the CSD86330Q3D in the TPS43061 application, we recommend using the TINA-TI models available for both these parts on the product folder.  Both these parts have a PSpice model as well if you would like to use them.

    Regards,

    Gerold