How do I import the spice sub cricuit of the UCC28C40 into Altium?

Stephen Oberholzer

Other Parts Discussed in Thread: UCC28C40, TINA-TI

Good morning,

I am not able to import the Spice sub circuit of the UCC28C40 into Altium. A previous thread said that the .lib file should be used for this by changing the .lib to .ckt Unfortunately this does not work and Altium does not accept it.

It is extremely important to know how to do this. Is there not an expert at Texas who can help?

Can someone please help?

Thank you very much.

over 11 years ago

0 Britt Brooks - Online Design Tools over 11 years ago

TI__Mastermind 41310 points

The PSpice models in the product folders are encrypted and can only be used in PSpice version 15.7 or higher. If you need to use the model in a different simulator that supports PSpice models, you will need to obtain the unencrypted model. Please refer to the post below for how to request the unencrypted PSpice model.

http://e2e.ti.com/support/development_tools/webench_design_center/f/234/t/36943.aspx

If you have a direct TI Field sales contact, they can also request the model for you.

The model is also available in TINA-TI.

Britt

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

How do I import the spice sub cricuit of the UCC28C40 into Altium?