• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 371 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Export of multi-output PSU designs - newbie

Andrew Woodward
Prodigy 10 points


Hi, I'm new to Webench and I designed a 6 output PSU and then tried to export the design to Design Spark in PCB and SCH formats - what it gave me was the files for each individual power circuit rather than the complete design.

Am I asking too much here or did I miss something during the design stage? I was hoping for the complete 6 output design!

  • 0
    TI__Expert 3085 points

    Hello Andrew,

    At this point, PCB and Schematic Export work on a single-supply design. When you construct your power supply tree in power architect, you can currently export the individual designs, not the whole project. Your suggestion is very good and we have noted it. While I cannot promise this feature, but we will surely take a very serious look at this request.

    I sincerely thank you for using the WEBENCH tools and I loved getting this suggestion. Users like yourself make our work worthwhile.

    Regards