• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 904 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CAD Symbols for Eagle or Kicad

Robert Åkerblom-Andersson
Intellectual 550 points

Hi I wonder if I can use any of the formats listed here:

http://focus.ti.com/general/docs/symfoot/downloadsymbolfootprint.tsp?orderablePartNumber=CC1101RTK&downLoadType=symbol

In the program Eagle or Kicad? Otherwise does TI officially recommend any specific PCB software?

  • 0
    TI__Expert 3875 points

    Hi Robert,

    TI does not generate any symbols and footprints for Eagle or for KiCad and I could not find any translators from any of the available formats into Eagle or KiCad. AXEL and PinPak are text based formats. AXEL looks similar to EDIF and PinPak (https://www.si2.org/?page=435/pinpak) is XML. With a bit of time, one should be able to write a converter from one of these text based formats into KiCad.

    TI does not officially endorse or support any specific PCB software package. Internally, TI uses many different PCB solutions.

    Regards,

    Michael

    Michael Krasnicki
    Analog eLab
    Texas Instruments