TPA3111D1 unencrypted spice model request

Patricio Cohen

Other Parts Discussed in Thread: TPA3111D1

Hello,

I need for a project to do spice simulations with TPA3111D1 device. I'm using a software package that requires the models to have no encryption. Can you please provide one? . We don't have Cadence Allegro here.

Thanks in advance

Patricio Cohen

over 11 years ago

0 Britt Brooks - Online Design Tools over 11 years ago

TI__Mastermind 41310 points

Patricio,

If you have a direct TI sales or engineering support contact, they may request the unencrypted PSpice model for you. If you do not have a direct TI contact, please follow the directions in the post listed below:

http://e2e.ti.com/support/development_tools/webench_design_center/f/234/t/36943.aspx

Britt

0 Patricio Cohen over 10 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 40 points

Thanks Britt,

I have followed your directions. I sent a message using the link you provided several days ago. I asked for the unencrypted model of the TPA3111D1, however, I have not received a reply yet. Can you please help me?

Best regards,

Patricio Cohen

Design Engineer
PAT-Traffic Chile

0 Don Dapkus over 10 years ago in reply to Patricio Cohen

TI__Guru**** 189401 points

Hi, Patricio,

Unfortunately, we are unable to give you the unencrypted model.

I can help you find other ways to solve the issue you are having (I am the applications engineering manager for this product).

Can you describe the issue you are facing?

-d2

0 Don Dapkus over 10 years ago in reply to Don Dapkus

TI__Guru**** 189401 points

Hi, Patricio,

I am standing by to help you... Let me know how I can help.

-d2

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TPA3111D1 unencrypted spice model request