UCC28950 ALTIUM SPICE MODEL

KADIR ARI

Prodigy 70 points

Other Parts Discussed in Thread: UCC28950, TINA-TI

Hi, Is available in hand altium spice file for UCC28950 ?

over 10 years ago

0 Britt Brooks - Online Design Tools over 10 years ago

TI__Mastermind 41310 points

Kadir,

We do not currently have an Altium model for the UCC28950. We do provide a PSpice model (encrypted and can only be used in PSpice version 15.7 or higher) and a TINA-TI model (TI's free simulator).

Britt

0 KADIR ARI over 10 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 70 points

Thank you,
Yes, I have a PSpice model for UCC28950 but I have been using PSpice lite version. When PSpice netlist files in 60 or 75 sub-circuit exceeds simulation process does not take. This is why I want to try on Altium.

0 Britt Brooks - Online Design Tools over 10 years ago in reply to KADIR ARI

TI__Mastermind 41310 points

Kadir,

TINA-TI is a free simulator that does not have the node limitations that PSpice lite has. It can import PSpice model files from other vendors and has many TI IC's built into it. We also provide many refernece designs for our IC's in TINA-TI. For more information on it, please see the following link:

http://www.ti.com/tool/tina-ti&DCMP=hpa_amp_general&HQS=Other+OT+tina-ti

The UCC28950 has two reference designs available (Startup and Stead State) in TINA-TI.

Britt

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

UCC28950 ALTIUM SPICE MODEL