• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 2820 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

variable resistor in TinaTI

ox
Prodigy 230 points
Other Parts Discussed in Thread: TINA-TI

 

Hi,

i d like to simulate a resistor bridge circuit with TinaTi.

I remember from my spice class, that you can create a voltage controlled resistor to simulate the excitation of the bridge.

can someone please give me a hint how to do that with TinaTI?

 

thx

andi

  • 0
    TI__Expert 5515 points

    You really can't do it in TINA-TI. To do it, you need controlled sources, which are available in the commercial version of TINA, but not in the TI version at this time.

    What you could do is to use the parameter stepping function of TINA-TI and make one of the resistors on the bridge the control object, and step the values - would work for basic DC analysis but wouldn't help you with transient analysis.

    Hope that helps - 

    Rick