TPS53515 TINA-TI model

Graham Schwinn60

Prodigy 60 points

Other Parts Discussed in Thread: TPS53515, TINA-TI, TPS53513

Would it be possible to get a model and reference design for TINA-TI for the TPS53515?

I would like to simulate my design before I push it out to production.

Thanks!

over 11 years ago

0 ranjanir over 11 years ago

TI__Intellectual 1760 points

Hi Graham

The TPS53515 and TPS53513 are similar as long as you are using an operating current less than 8A. For such applications, you may use the TPS53513 model which already has a TINA-TI model to download.

Regards

Ranjani

0 Graham Schwinn60 over 11 years ago in reply to ranjanir

Prodigy 60 points

Hey Ranjani,

Originally, I did have the TPS53513 designed in. It became apparent during the design phase that 8A was not going to be enough current. I am trying to simulate worst-case load transients, which should exceed 10A.

Is there any chance that I could still get the simulation model for the TPS53515?