Import SPICE Model UCC25600 into TINA Simulation

volkmar buckow

Prodigy 20 points

Other Parts Discussed in Thread: UCC25600, TINA-TI

Hello,

if i try to start an Analysis i get an error message : undefined model D_D1 in /SPICE/ TSPICE.lib

wath's to do to Import all components correct ?

thanks for your support

regards

Volkmar Buckow

Mail : Volkmar.buckow@wittenstein.de

over 11 years ago

0 Britt Brooks - Online Design Tools over 11 years ago

TI__Mastermind 41310 points

Volkmar,

You do not need to import any components to use the UCC25600 in TINA-TI. There is a reference design in the product folder under the Tools and Software tab. If you have a custom design created, you can always cut and paste the UCC25600 into your custom schematic using "Ctrl-C" and "Ctrl-V" from the reference design.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Import SPICE Model UCC25600 into TINA Simulation