I have a number of designs on Webench for the LMP90100, whenever i try to open them, or create a new webench design for the LMP90100 the site opens the webench power option and will not load the LMP90100, what am I doing wrong, it all worked before?

Hi Clive,
Are you opening WEBENCH(R) Sensor AFE from the LMP90100 product page panel (www.ti.com/.../lmp90100)? It is working for me.
Kris

Also, you can try loading from the MyDesigns page which is accessible from the WEBENCH entry panel on ti.com:

http://webench.ti.com/appinfo/webench/scripts/my_designs.cgi

Regards,

Jeff

 

Yes and I get a message :-
"Downloading Sensor AFE.swf:628919 bytes of 628919 bytes 100% " and nothing happens, same if I open from my designs.

Yes and I get a message :-
"Downloading Sensor AFE.swf:628919 bytes of 628919 bytes 100% " and nothing happens, same if I open from my designs. Although last week as I said it was loading the power supply version of Webench instead of the suitable version for AFE's. I have run this before with no problems.

Clive,

Can you please clear your browser cache and then check if it works?

Here's how you would clear browser cache (firstly, close the tab that has WEBENCH open and then follow steps below) -

If you're using "google chrome"-> go to menu options -> more tools -> Clear Browsing Data... -> Select "Cached images and files" from the pop up if its not already selected and press "Clear Browsing Data" button.

If you're using "firefox" -> go to tools -> options -> select the "Advanced" tab -> select "Network" tab and press the "clear now" button corresponding to "Cached web content".

If you're using "IE" -> Go to settings/tools -> Internet Options -> select "General" tab in the pop up that opens up and press "Delete" button corresponding to "Browsing history".

After you've gone through the steps mentioned above, please try opening your LMP90100 design again and see if it works.

Regards,
Shrikrishna.

Shrikrishna,

  I cleared the cache ( on Fire Fox ) now contains zero bytes, same problem.    I have the LMP90100 eval  and SPIO boards, so I can run my tests on them, but the online Webench still will not load, thanks.

Clive

Clive,

  Can you try another browser type (IE or Chrome)?

Regards,

Jeff