Issue Importing OPA2330 PSPICE File into ADS

Tony Milluzzi

Other Parts Discussed in Thread: OPA2330, OPA330

I'm trying to import the OPA2330 PSPICE model into ADS 2014.01, but when I do, I get a symbol with only 5 pins rather than 8. Any ideas on why this is happening?

over 11 years ago

0 Britt Brooks - Online Design Tools over 11 years ago

TI__Mastermind 41310 points

Tony,

The OPA330 only has 5 active pins. It has 3 NC (not connected) pins in the 8 pin package. All of the other packages only have 5 pins.

The model only has one channel modeled in it and that is probably the issue. The model is really only a single channel OPA330.

The dual and quad devices use the same model as the single channel.

0 Tony Milluzzi over 11 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 20 points

Ah ok, I see now. Thank you!

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Issue Importing OPA2330 PSPICE File into ADS