TIDA-00120 (MPPT Charger) Design files

Jacek,

I'll check with our team.

Britt,

Did you manage to check it?

Regards,

Jacek.

Jacek,

Unfortunately, I have not been able to find a way to get the board and schematic files into an Altium format.

Britt,

All I need is these files in PADS ASCII format. Altium can import PADS ASCII files. This should be relatively easy to just save them in PADS ASCII format.

Regards,

Jacek.

Jacek,

Is this what you were looking for?

PMP7605_REVC.txt

Let me know if this is correct.

Britt,

This is schematic, I'd be 100% happy if I have PCB files in txt format.

Regards,

Jacek.

Britt,

Files are correct and working in Altium. This is all I need, thanks for your help :D

Regards,

Jacek

Hello,

I'm getting an error message while importing the "PMP7605_REVC_board.txt" file in Altium. The error message is,
"The design file PMP7605_REVC_board.txt not recognized,
Please try to import ASCII files created using one of the following programs:
PADS POWERPCB versions V1, V1.5, V2.0, V3.0, V3.5, V4.0, V5.0,
PADS Layout versions V2005.x, V2007.2, V9,
PADS-PCB version V5.0 PADS2000 versions V3.0 and V4.0, PERFORM version V6. " Can you please resend the PCB layout file using one of these versions of PADS?
Thank You.

Hello,

I think I had same problem as you. Try to change extension to *.asc and then import into Altium.

Regards,

Jacek.

Thank You very much Jacek, it works now.

Hi, Jacek.

Can You please send me the  instructions, how to get them imported to Altium .

I have Altium 16.0.6 , I managed to get some sort imported but cannot get it exported to any readable Gerber files..

The schematic did not load into altium eighter...

Better yet woul'd be if You coul'd send or upload working Gerber files .

It woul'd be much appreciated..

With Best Regards

Hng