• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 37 subscribers
  • Views 448 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Why does Webbench limit the switching frequency below the part limits?

Michael Von Ahnen
Intellectual 580 points

I am trying to generate a design using the TPS57160 and the webbench limits my frequency to ~550 KHz, even though the part runs up to 2.5 MHz.  What is causing this limit?  The part support 100% duty cycle.