Need IBIS model for ISO7241C

Lenny

Intellectual 700 points

Other Parts Discussed in Thread: ISO7241C

Dear Madam or Sir,

Please provide an ibis model for the ISO7241C.

Thanks;

over 9 years ago

0 David Larkin over 9 years ago

TI__Mastermind 20460 points

Hi Lenny,

There was a glitch with our upload system. I've resubmitted this for release. The batches for that run overnight, so please check back again tomorrow.

If that doesn't work and you need it immediately, please provide your email, and I can send you the ibis file directly.

Regards,

David

Webench Design Center

0 Lenny over 9 years ago in reply to David Larkin

Intellectual 700 points

David,

Please email to leonid.y.ayzenshtat@lmco.com

Thanks.

0 Richard Elmquist over 9 years ago in reply to Lenny

TI__Mastermind 45250 points

David,

Can you also email the ISO7241C IBIS model to me? I have a customer that needs it.

Thanks for your help with this!

Richard Elmquist

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Need IBIS model for ISO7241C