Simulation error with OPA627

Marco Manzel

Other Parts Discussed in Thread: TINA-TI

Dear friends of tina ti. I wanted to replay an example from the precision lab, but I get this message (with a fresh installed tina ti).

Thank you

Marco

over 9 years ago

0 Britt Brooks - Online Design Tools over 9 years ago

TI__Mastermind 41310 points

Marco,

Could you share the message with us?

If you have a .TSC file, that would be useful as well.

0 Marco Manzel over 9 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 50 points

Dear Britt,

I re-installed tina-ti and now it works. This time I did not the Update from the Help menu.
Maybe this was the problem.

Thank you and best regards

Marco

0 Britt Brooks - Online Design Tools over 9 years ago in reply to Marco Manzel

TI__Mastermind 41310 points

Marco,

Glad to hear your simulation is working now. If you experience any further issues, please remember to capture the error message so that we can assist with the debug/resolution of the problem. Also, finding the real source of the error is easier if you provide the .TSC file from TINA-TI that shows the erroneous behavior. Thanks for your interest in TI products. Let us know if you need any further assistance.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Simulation error with OPA627