TPS7A7200 PSICE model for TINA

James Crow

Prodigy 180 points

Other Parts Discussed in Thread: TINA-TI

When I tried to create this Macro I received the following Error message: Invalid device $CDNENCSTART. LINE: #38.

Please advise on how to create this Macro.

Thank you,

over 9 years ago

0 Britt Brooks - Online Design Tools over 9 years ago

TI__Mastermind 41310 points

James,

The PSpice model in the product folder is encrypted and cannot be imported into TINA-TI. You will need the unencrypted PSpice model for the device before you can import it into TINA-TI.

Let me check on this to see what we can do for this device.

0 James Crow over 9 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 180 points

How do I go about getting the unencrypted version?

0 Britt Brooks - Online Design Tools over 9 years ago in reply to James Crow

TI__Mastermind 41310 points

James,

In this case, we obtained permission to release the unencrypted PSpice model to the product folder. I have just started that process and the unencrypted PSpice model should appear in the product folder after the next update (tomorrow afternoon). If the model is not present by Monday morning, I will get a copy posted here as well.

Thanks for your interest in TI products.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TPS7A7200 PSICE model for TINA