TPS51610 - Model Request

Simon Felhofer

Other Parts Discussed in Thread: TPS51610Part Number: TPS51610

Question type: Development and troubleshooting

Description of the problem: Requesting PSPICE model for this converter to support troubleshooting of an existing design that leverages this part.

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Hi Simon,

Please check out the instructions in the "Tools and Software" tab in the product folder on how to obtain this PSpice model.

0 Keith Keller over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Expert 7230 points

Hi Nikhil,

The problem is when you try to download the PSPICE model from www.ti.com/spicerack there is an error: "No models were found"

Please see attached screen capture. I clicked on the check box.

Any thoughts? Thanks for your help. Keith

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to Keith Keller

TI__Mastermind 39210 points

Hi Keith,

Sorry about the inconvenience. This model is protected and can only be obtained by sending an email to a list. The details are in the "Tools and Software" tab in the TPS51610 product folder. I will check to see if Spicerack messaging can be made more intuitive for this device.

0 Simon Felhofer over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 20 points

I've sent an email to 'imvp@list.ti.com'. Thanks for your prompt feedback Nikhil.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TPS51610 - Model Request