TINA/Spice/OPA615: OPA615.cir file required

Keyur Mistry32

Part Number: OPA615
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Hello

I am unable to find OPA615 model in Multisim. Can anyone help me to make the model of OPA615 so that i can use it for the simulation purpose of fast peak detectors.

Regards

Keyur Mistry

over 8 years ago

0 Britt Brooks - Online Design Tools over 8 years ago

TI__Mastermind 41310 points

Keyur,

You may import the PSpice model found in the product folder under the Tools & software tab into Multisim. The model is not encrypted.

0 Keyur Mistry32 over 8 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 30 points

I tried to make the model using that but i am unable to do that. It shows some error "multiple subckt included".

It would be great if you can help me in providing me with the opa615 model in multisim so that i can run my simulation on peak detector

0 Britt Brooks - Online Design Tools over 8 years ago in reply to Keyur Mistry32

TI__Mastermind 41310 points

Keyur,

Unfortunately, I cannot help with Multisim as I do not use it and do not have access to it to use. I do know that it should be able to import the PSpice model (and yes, there are multiple subcircuits contained).

I would ask for help on the Multisim forum on the NI (National Instruments) website.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/OPA615: OPA615.cir file required