• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 791 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools: TPS55340RTET

Vincent 47
Prodigy 110 points

Other Parts Discussed in Thread: TPS55340, LM3478

Tool/software: WEBENCH® Design Tools

I have an error on webbench with TPS55340RTET.

Vin : 3V-5V

Vout : 24V, 1.5A

Airtemp : 30'C.

I try to use this for plasma igniter.

Please let me know how I can use web bench for my condition.

BR

Vincent

  • 0
    TI__Mastermind 46905 points
    from the input/output application, the maximum input current at VIN=3V is 12A, which is higher than the input current limit of TPS55340. the input peak current of TPS55340 limit is 6.6A.
  • 0 in reply to Jasper Li
    Prodigy 110 points

    Thanks

    Then, I suppose 25V, 0.7A might be possible.

    Could you let me know for the webbench for 25V, 0.7A?

    BR

    Vincent

  • 0 in reply to Vincent 47
    TI__Guru 50120 points
    Hi Vincent,

    How flexible are you with the output current and is there a reason why you haven't considered a controller like the LM3478. With the controller you can pick your MOSFET that can tolerate higher junction temperatures. For the TPS55340, even with the 24V output @ 0.7A output current, the current will still be too high for the internal MOSFET switch assuming 85% efficiency range. This doesn't included the inductor current ripples that can affect this situation.


    Internal MOSFET current limit = 6.6A

    n = Pout / Pin

    85% = 24V(0.7A) / (3V *6.6A)