• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 945 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/CSD95379Q3M: Simulation with LTspice

nickelson
Prodigy 50 points
Part Number: CSD95379Q3M
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Hi,


I want to use the CSD95379Q3M in my design. Therefore I want to simulate it beforehand.

I'm struggling implementing it in LTspice. My error message says: "Too few nodes". Is it somehow possible to use the encrypted files or do I have to use a different simulaton program?

Thanks for your help,

nickelson

  • 0
    TI__Intellectual 2405 points

    Hi Nickelson,

    The model  CSD95379Q3M file is encrypted and will work only in OrCAD CIS 15.7 and above. Also, as per End User License Agreement (EULA) of LTSPICE, we can not support model development or debug in LTSPICE.

    We can provide the device model in TINA-TI compatible format, if that meets your application requirement. TINA-TI is a SPICE-Based Analog Simulation Program that TI provides users freely for their circuit simulations. You can find more details about it here. Kindly let us know.

    Thanks!!

    Best Regards,

  • 0 in reply to Mahavir Jain
    Prodigy 50 points
    Hi Mahavir,

    Thank you for your quick answer. Yes, I would like to have the TINA-TI model so simulate the behaviour.

    Thanks in advance and best regards,
    nickelson