WEBENCH® Tools: DesignSpark export not showing as an option

Christopher Duff

Tool/software: WEBENCH® Design Tools

The DesignSpark format does not appear in the list of PCB or Schematic Export options from WEBENCH. How should the DesignSpark format be selected for output from the export utility? The link to further information at the link below also does not work:

over 8 years ago

0 Howard Chen-WEBENCH Design Center over 8 years ago

TI__Expert 6365 points

Hi Christopher,

Thank you for your support of TI's WEBENCH tool.

Unfortunately, due to some legal concerns, we are not allow to support DesignSpark.

Please send me a email of the device interest with its operating conditions and I maybe able to provide something.

howard.chen@ti.com

0 Christopher Duff over 8 years ago in reply to Howard Chen-WEBENCH Design Center

Prodigy 20 points

Many thanks for your prompt response Howard and I appreciate your offer. However, I will need to generate a few supply outputs so will see if I can use alternative PCB design software.

Best regards,

Chris

0 Howard Chen-WEBENCH Design Center over 8 years ago in reply to Christopher Duff

TI__Expert 6365 points

OK Chris. I will close this thread.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools: DesignSpark export not showing as an option