TINA/Spice/CC2640R2F: Spice model to simulate in Altium

pragash sangaran78

Part Number: CC2640R2F
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

we are using CC2640R2F in our new product. i would like to request spice model for CC2640R2F to be simulated in Altium designer. i could not find the model in the link below. please help!

https://webench.ti.com/webench5/spicemodels/?DCMP=hpa_hpa_elabs&HQS=spicerack

over 8 years ago

0 Fredrik K over 8 years ago

TI__Guru** 106705 points

Hi Pragash,

There is no Spice model for the CC2640R2F. I assume you want to simulate the analog interface? Can you share some more details?

Cheers,
Fredrik

0 pragash sangaran78 over 8 years ago in reply to Fredrik K

Genius 3510 points

What i mean is microprocessor emulator simulation.

0 John Miller - Sensing over 8 years ago in reply to pragash sangaran78

TI__Mastermind 40295 points

Frederik,
Spice is used to simulate analog behavior.
I have never heard of using Spice for an emulator simulation.
If you have seen this before, would you please provide an example?
Regards,
John

0 Fredrik K over 8 years ago in reply to John Miller - Sensing

TI__Guru** 106705 points

Hi John,

I agree.

We do not have any simulation models for our MCUs.

Best regards,
Fredrik

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/CC2640R2F: Spice model to simulate in Altium