TINA/Spice/TL5002: TL5002 Spice model

Hello John,

Thank you for your reply.

I am looking for a spice model for Orcad Capture and I didn't find in the link you mentioned. Could you tell me more details please ?
Thank you
Kaustubh

The model is for TINA-TI. It is a free simulation program that you can down load from TI. It is similar to pspice.

Hello John,

I tried to find the model in the TINA-TI spice model collection (using the following link) but I didn't find it in the list.

www.ti.com/.../midlevel.tsp

Thank you.
Kaustubh

It appears the link I provided is just for the TINA-TI program. I don't know why they put that link in that folder. I think there may not be any model available for TL5002. It is a very basic device. I should not be too hard for you to build your own model for it. If you can tell me about your business case, I may be able to request a model from our modelling team.

Hello all,

I'm working on a power electronics project ((48V->12V / 40A) Non isolated buck converter).The project is an evaluation board of an advanced DC DC converter with low power loss. I need a voltage traker in my project as the TL5002 (or any high performance PWM voltage traker), and to simulate my project in Orcad Capture, I need the spice model of this PWM voltage traker. As you know, the spice model is not available from ti website. Please, could you send to me this spice model for orcad capture simulation.
Thanks in advance.

Best regards.

AJOUHY Ayoub

Power Electronics, DC/DC Researcher.

Usually, these requests get prioritized based on the business case. You can contact me directly at j(dash)tucker(at)ti(dot)com if you don't want to share details on line.