TINA/Spice/DS16EV5110A: simulation model

Yifan Yang

Prodigy 210 points

Part Number: DS16EV5110A
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Hi:

I want to simulate a full signal chain with ds16ev5110a, could you please provide me a ibis model or spice model ?

Thank you very much.

over 8 years ago

0 John Miller - Sensing over 8 years ago

TI__Mastermind 40295 points

Yifan,

What kind of simulations and results do you want with a DS16EV5110A model?

Regards,
John

0 Yifan Yang over 8 years ago in reply to John Miller - Sensing

Prodigy 210 points

Hi John:
Our project is using ds16ev5110a recover 250Mbps signal from cat5 Ethernet cable, we got some glitches at the output maybe due to NEXT, we would like to simulate the whole data chain with ansys siwave and designer, so the best fit would be an ibis model.

0 John Miller - Sensing over 8 years ago in reply to Yifan Yang

TI__Mastermind 40295 points

Yifan,
Thank you for the reply.
We don't have a IBIS model for this device.
As a workaround I looked for a similar part with an IBIS model, but had no luck.
If a ds16ev5110a IBIS model is a must-have, please submit a request through your local TI sales rep.
Regards,
John

0 Yifan Yang over 8 years ago in reply to John Miller - Sensing

Prodigy 210 points

Hi John:
Thank you for your suggestion.
Could you please tell me if you have any component with ibis which has similar input structure as ds16ev5110a ? In this case we can at least get the correct load for our chain .
Best regards!
yifan

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/DS16EV5110A: simulation model