Tool/software: TINA-TI or Spice Models
Dear Sir,
I need the constant current source, pulse voltage source and pulse current load for my simulation. I cannot find them in the source menu. Can you point me to the right library?
Thanks,
Mark
Hi Mark,
Follow the below steps -
If you are using the Orcad Cadence-PSpice tool
1. Add the library from the "Libraries" window. When you type 'p' you will get at the right side of window.
2. Insert "Source" library
3. Type the components you required in the "Part" window
For,
a. Constant current source type as IDC
b. pulse voltage source type as VPULSE
c. pulse current load - IPULSE
If you are using the TINA-TI tool -
1. Click on the "Source" tab
2. Use third icon for constant current source, 4th icon for "pulse voltage or variable voltage source" you need to click on the voltage source once you place in the schematic window, double click on it you will get to see "Unit Step" edit it as per your need, 5th icon for variable current source.
Hope it helps!
Regards,
Bhushan
