TINA/Spice/TPS92630-Q1: TPS92630-Q1

Juan Carlos Salido

Part Number: TPS92630-Q1
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Hi all,

I would like to know if is available a PSpice model for this LED driver working on Temperature or is needed some special configuration on simulation parameters.

Kind Regards.

Juan Carlos Salido.

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Juan,

There is a PSpice model available for this device in the product folder: www.ti.com/.../toolssoftware
However this is only modeled for typical conditions and temperature. No temperature effects are modeled.

0 Juan Carlos Salido over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 20 points

Hi Nikhil,

I was trying to make simualtions on temperature but if is not possible I will simulate only @25ºC, bad luck.

Thanks for your quickly answer.

Kind Regards
Juan Carlos

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/TPS92630-Q1: TPS92630-Q1