TINA/Spice: Summing block.

Kaushal Tiwari

Prodigy 135 points

Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Is there any summing block in TINA TI????

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

Kaushal,

If you go to the sources tab >> click on "Controlled Sources" icon >> then click on "Controlled sources wizard", you can create any arbitrary function that spice will recognize including a summing block. The number of inputs and type of output are also configurable here.

If you are new to TINA-TI, you will benefit from the short Video Training Series shown below.

0 Kaushal Tiwari over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 135 points

Thank you... This esolved my issue to some extent...

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice: Summing block.