TINA/Spice: Vacuum Tube spice models

Roman HULA

Prodigy 20 points

Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Wondering if it is possible to download AYUMI's vacuum tube spice models files, and install these in Tina v9.

Romansky

over 7 years ago

0 Nikhil Gupta (Product Folder Models) over 7 years ago

TI__Mastermind 39210 points

Romansky,

If you have spice compatible models from any manufacturer, you can import these into TINA-TI using the import feature. More details can be found in the short Video Training Series below.

0 Roman HULA over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 20 points

Hi there,
I was enquiring about where can I download specific spice models developed for tina v7 by Ayumi for vacuum tubes and compatible with tina v9?
TH
Romansky

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Roman HULA

TI__Mastermind 39210 points

Romansky,

I do not have TINA v7 installed anymore, so I can not try this out. However, if you have both V7 and V9, you can try to instantiate the device in a TSC file in V7, then save it and open it in V9.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice: Vacuum Tube spice models