WEBENCH® Tools: WEBENCH Design Using Through-Hole Components

Steve Smith2

Tool/software: WEBENCH® Design Tools

Hi,

I'm not sure if I'm missing something here.

I know you can filter by footprint and select alternative components, (which are always SMD) but is it at all possible to filter components by 'Through-Hole' only?

Can WEBENCH be more Hobbyist friendly?

Steve.

over 7 years ago

0 Gerold Dhanabalan - Online Design Tools over 7 years ago

TI__Genius 14455 points

Hi Steve
When you go to Select Alternate Part, you can click on "Show More Columns". Then you should see a column called Mount which you can use for sorting. Currently most components that we use are SMD only. Thanks for your suggestion about Thruhole components. We are hesitant to have thru hole components into the list as power supplies can be very sensitive to the parasitics from the leads of these components and meeting the required performance would be challenging.

Regards,
Gerold

0 Steve Smith2 over 7 years ago in reply to Gerold Dhanabalan - Online Design Tools

Prodigy 20 points

Hi Gerold,

Thank you for your reply.

Steve

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools: WEBENCH Design Using Through-Hole Components