TINA/Spice/LM2903: LM2903 in TINA-TI

Vladimir Naumenkov

Part Number: LM2903
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Dear Sir, please answer

I downloaded PSpice model of LM2903, renamed file in LM2903.TSC, but this file doesn't open in TINA-TI. It turns out that it can not be used for TINA-TI?

TIA

Sincerely

Vladimir Naumenkov

www.agat.by

over 7 years ago

0 Somen Das over 7 years ago

TI__Intellectual 1040 points

Hi Vladimir,

It seems like the Pspice model available on Website does not contain all the files required for a PSpice project. Also, it will not work in TINA-TI the way you have renamed it. We are looking into it. I apologize for any inconvenience.

Thanks,
Somen

0 Vladimir Naumenkov over 7 years ago in reply to Somen Das

Expert 2970 points

Dear Somen, thank you

Sincerely,

Vladimir Naumenkov

www.agat.by

0 Somen Das over 7 years ago in reply to Vladimir Naumenkov

TI__Intellectual 1040 points

Hi Vladimir,

You can try out the short video training series where #1.9 video tells you how to import SPICE models into TINA-TI. I have attached one .TSC file which you can use to start with.

LM2903.tsc

Thanks,

Somen

0 Vladimir Naumenkov over 7 years ago in reply to Somen Das

Expert 2970 points

Dear Somen, thank you

Sincerely

Vladimir Naumenkov

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LM2903: LM2903 in TINA-TI