TINA/Spice: Problem with Demo Tina software for Temperature Analysis

sujay kulkarni

Prodigy 130 points

Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Tina prob.docx

over 7 years ago

0 John Miller - Sensing over 7 years ago

TI__Mastermind 40295 points

Sujay,

Please try closing TINA, restarting your computer, and then re-running the sim.
If that does not work, please post your schematic to this thread.

Regards,
John

0 sujay kulkarni over 7 years ago in reply to John Miller - Sensing

Prodigy 130 points

Dear ADA4528-2.TSCsir still these had not not solved mine issue ,same error is being generated

0 JC Zhu over 7 years ago in reply to sujay kulkarni

TI__Mastermind 37640 points

Sujay,

Please define an output for which the waveform is plotted over temperature. For example, you can place a volt meter on the output node using the "Meters" tab.

Thanks,
JC

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice: Problem with Demo Tina software for Temperature Analysis