How to create TINA model from PSPICE model

Viswanath Yanamandra

Prodigy 10 points

Other Parts Discussed in Thread: LM339

Hi,

I have downloaded LM339 Comparator's PSPICE model.

I want to use it in TINA.

I am new to TINA software, somebody please help in this regard.

Thanks and Regards,

Viswanath

over 15 years ago

0 John Miller - Sensing over 15 years ago

TI__Mastermind 40295 points

Viswanath,

I am a modeling engineer in the Analog eLab group. We will create a TINA macromodel and make it available on this forum web page a little later today or tomorrow.

There is also an applications note that gives a step-by-step procedure for creating a TINA macromodel from a Pspice macromodel.

The document number is SLVA424 and it is available on the TI web site:
http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=slva424

A copy has also been uploaded to this page.

Thank you for your inquiry.

Regards,

John Miller

0 John Miller - Sensing over 15 years ago

TI__Mastermind 40295 points

Viswanath,

A TINA model has been created for the LM339 and is (hopefully) available for download from this page, along with a small test circuit.

Please let me know if you have any questions.

Regards,

John Miller

Modeling Engineer
Analog eLab

1777.TI_LM339.TSM
2677.TestCircuit_TI_LM339.TSC

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

How to create TINA model from PSPICE model